TAPMATIC SFT II 100 RIGID TAPPING HEAD / ATTACHMENT + COLLETS

Description

Made in the U.S.A. by Tapmatic.
This is a lightly used Synchroflex Rigid Tapping Head / Attachment with Internal Coolant in EXCELLENT condition. Includes all collets, rack and wrench that's shown in photos.
Model #: SFT II 100
Head alone retails for ,334.93 online!!
Features:
Modern CNC machines have the capability of synchronizing the spindle rotation to match the feed advance for a specific tap pitch. The «Rigid» or synchronized tapping cycle is very accurate, but it is impossible to avoid small discrepancies between the machine synchronization and the actual pitch of the specific tap being used. Using a rigid tap holder means that any deviation at all increases the thrust forces acting on the tap and this dramatically reduces tap life.
Corrects for the unavoidable deviations between the machine feed and the actual thread pitch of the tap during the rigid or synchronized tapping cycle. With a solid holder, any deviation at all from the correct feed rate for the thread pitch or the precise hole location results in added wear on the tap. SynchroFlex, with its unique flexure for micro compensation, allows the tap to produce threads of the highest quality without undue wear, resulting in the longest life for the tap.
Increase tap life by 100% or more.
Improves thread quality.
Reduces downtime by lowering frequency of tap replacement.
Axial compensation +/-0.5mm
Specifications:
Capacity: 5/8" to 1" (M16 to M30)
Collet Type: ER40
Shank: 1" Straight
Body Diameter: 62mm
Body Length: 117mm
Overall Length: 6-1/2"
Comes as shown in pictures.
-Ref 100-61